What an attic fan does
A powered attic fan, often called a power vent, pulls hot air out of the attic so it can be replaced by cooler air from the eaves. Most are mounted on the roof near the peak; some are mounted in a gable wall. A thermostat switches the fan on when the attic gets hot, often with a humidity control for damp weather.
When a fan is the right answer
A fan is not always needed. Many attics do well with passive ventilation: soffit vents to let air in and a ridge vent to let it out. A fan helps when:
- The roof shape makes a continuous ridge vent impossible or too short, as on some hip roofs.
- The attic has very little exhaust and adding passive vents is not practical.
- An existing fan has failed and the attic was designed around it.
What a fan needs in every case is enough intake. Without open soffit vents, a fan pulls air from the house below through ceiling gaps and light fixtures, which wastes air conditioning and draws moisture into the attic. We check the intake before we recommend a fan.
Replacing a failed fan or thermostat
Attic fans wear out: bearings get noisy, motors stop, and thermostats fail stuck on or stuck off. If the motor is sound, a new thermostat can be enough; if the fan is old, replacing the fan and thermostat together saves a second visit. The roof flashing around an old fan is often tarred or rusted, so we replace it with the fan.
Roof fans and leaks
A fan on the roof is an opening like any other, and it depends on its flashing. We weave the fan’s flashing into the shingles so water runs around it, the same way we flash a skylight or vent. For passive vents instead, see ridge, soffit and roof vents.