The roofs on Staten Island’s commercial buildings
Most commercial buildings on the island have flat roofs: storefronts and offices along the main roads, mixed-use buildings with apartments above shops, and warehouses and light industrial units. Some industrial buildings have metal roofs. Each brings its own concerns, from rooftop HVAC units and their curbs on a flat roof to fasteners and laps on a metal one.
Flat commercial roofs
We repair and replace commercial flat roofs with TPO and EPDM membranes, and extend the life of sound roofs with coatings; see flat roofing for how each system works. The work on a commercial roof is the same in principle as on a house, but larger and with more going on: rooftop equipment, more drains, longer parapets and often a business running underneath.
Metal commercial roofs
Metal roofs on commercial buildings fail at their fasteners, laps and flashings rather than in the panels themselves. Screws loosen and their washers perish, laps open, and rust starts at cut edges. Many of these can be repaired or sealed; badly corroded roofs are replaced. Metal roofs on houses are covered under roof replacement.
Working around your business
A roof job should not shut your business down. We plan work around your opening hours and deliveries, keep entrances clear and safe, and tell you in advance about anything noisy. You get a written proposal before work starts and photos when it is done, which helps with landlords, tenants and insurers.
Maintenance and inspections
Most commercial roof failures start small: a clogged drain, a lifted seam, a loose flashing at a rooftop unit. Regular inspections catch them while they are cheap. See commercial roof maintenance and roof inspection.
What a commercial roof proposal should include
A good commercial roofing proposal is specific enough to compare and to hold the contractor to. Ours sets out:
- The roof as it is: the system, its condition, the drains and edges, and photos of each problem area.
- The recommendation and why: repair, coating, maintenance or replacement, with the reasons in plain words.
- The scope: square footage, what comes off, insulation and drainage work, flashing at parapets, curbs and penetrations, and edge metal.
- The schedule: how many days, which hours, and how access, deliveries and tenants are handled.
- The price and the warranty: in writing, with what is covered.
If you are comparing proposals from several roofers, line them up item by item. Differences in price usually come from differences in scope, especially insulation, drainage and flashing. Our guide on how to read a roofing estimate explains the terms.