Why seamless
Traditional sectional gutters are joined every ten feet or so, and every joint is a seal that can fail. Seamless gutters are made in one continuous length for each side of the house, so the only joints are at the corners and the downspouts. Fewer joints means fewer drips, fewer stains on the siding and less to maintain.
Sized and pitched for the roof
A gutter has to carry what the roof sends it. A large, steep roof sheds water fast, and an undersized gutter overflows in heavy rain even when it is perfectly clean. We measure the roof area draining to each run and size the gutters and the number of downspouts to match. Each run is hung with a slight, steady fall toward its downspout so water does not sit and debris washes through.
Getting the water away from the house
Gutters only solve half the problem if the downspouts dump water at the foot of the wall. We extend downspouts so water discharges away from the foundation, where it cannot soak the soil against the basement wall. On houses under trees, gutter guards can be added at installation. If your roof is due too, see roof replacement: new gutters and a new roof edge belong together.