Flat roofs · Staten Island

EPDM rubber roofing in Staten Island

EPDM rubber roofs patched, re-seamed or replaced. We tell you honestly whether a repair or a new membrane makes sense.

5.0 on Google from 83 reviews GAF Master Elite® roofer

The short answer

EPDM is the black rubber membrane common on flat roofs, and part of our flat roofing service. We repair split seams, punctures and failed flashing, or replace the membrane when it is worn out. A well-installed EPDM roof typically lasts 20 to 30 years. Work is priced by the job after a free inspection, and a replacement usually takes 3 to 5 days.

Price
Priced by the job
Repairs
Seams, punctures, flashing
Replacement
Usually 3–5 days
Lifespan
Typically 20–30 years

Signs

Signs your rubber roof needs attention

  1. Seams peeling open, especially at corners and edges.
  2. The membrane shrinking and pulling away from walls or edges.
  3. Punctures from foot traffic, branches or dropped tools.
  4. Bubbles or loose areas where the membrane has come unglued.
  5. Cracked or chalky rubber on an old roof.
  6. Leaks around drains, pipes or the roof hatch.

Seeing one of these? Call (347) 323-9128 or request a free inspection. We come to you.

What we do

How we repair or replace EPDM

  1. Inspect

    We check every seam, edge, drain and penetration and look for wet insulation under the rubber.

  2. Recommend

    A repair if the damage is local and the rubber is still flexible; a new membrane or coating if it is worn out.

  3. Repair

    Damaged areas are cleaned, primed and patched with compatible EPDM tape or membrane; seams are re-sealed.

  4. Or replace

    The old rubber comes off, the deck and insulation are repaired, and a new membrane is installed with new flashing at walls and drains.

What EPDM is

EPDM (ethylene propylene diene monomer) is a synthetic rubber membrane, usually black, laid in large sheets and glued or mechanically fastened to the roof. It has been used on flat roofs for decades, stays flexible in cold weather and is straightforward to repair.

How rubber roofs fail

EPDM itself is durable. The weak points are the seams, which are glued or taped rather than welded, the edges where the sheet turns up walls, and the places where it is cut around drains and pipes. Over the years seams can let go, the membrane can shrink and pull at its edges, and foot traffic can puncture it. These are usually repairable if they are caught before water soaks the insulation underneath.

Repair, coat or replace

  • Repair when the damage is local and the rubber is still flexible.
  • Coat when the roof is sound but aging and you want more years, or a white surface. See flat roof coatings.
  • Replace when the rubber is brittle, seams are failing across the roof, or the insulation is wet.

We show you photos and tell you which applies. For the white welded alternative, see TPO roofing.

Price

What it costs

EPDM repairs and replacements are priced by the job after a free inspection, depending on the size of the roof and what we find.

Staten Island roofing prices for 2026

Written estimate

Staten Island · prices updated

EPDM rubber roofing prices, updated Nov 2026
JobPrice
Flat roof repair or replacement Priced by the job
TPO and EPDM. Depends on size, drainage and insulation. Flat or complex roofs take 3 to 5 days.

Exact price after a free inspection, in writing, before any work starts.

ProLine Roofing · NYC HIC #2120969-DCWP · GAF Master Elite®

Leaking now

Water is coming in right now?

Call us at any hour. We are open 24/7 for leaks and storm damage across Staten Island.

★ 5.0 on Google · 83 reviews

What customers say

★★★★★

“They stuck to their quoted price and were very professional in keeping us informed on progress throughout the day.”

MichelleGoogle review · Apr 2025
★★★★★

“They were quick to respond, diagnosed the issue immediately, and provided a very fair quote.”

wendy rodriguezGoogle review · Jun 2026
★★★★★

“We haven't had any leaks during the recent heavy rain, and the flashing looks tight.”

marisa molinaroGoogle review · Jun 2026

FAQ

Questions about epdm rubber roofing

Can an old EPDM roof be repaired?

Yes, if the rubber is still flexible and the insulation underneath is dry. Seams, punctures and flashing can be repaired with compatible materials. If the rubber is brittle or the insulation is wet, replacement makes more sense.

How long does an EPDM roof last?

Typically 20 to 30 years when installed and flashed well.

Can EPDM be coated?

Yes, with a coating made for EPDM, over a clean, sound roof. It can extend the roof's life and turn the surface white.

Should I replace my EPDM roof with TPO?

It depends on the roof. Both last a similar time; TPO is white with welded seams, EPDM is easy to repair. We recommend one after the inspection and price it in writing.

Free estimate

Get a straight answer about your roof

  1. We call you back
    Usually the same day, to book a time that suits you.
  2. We come to you
    The owner inspects at your home, photographs what he finds and shows you.
  3. You get a written price
    Free, with no obligation. The exact figure, on paper.

Rather talk? Call (347) 323-9128. Open 24/7 for leaks.

Tell us about your roof

Four quick answers. We call you back, usually the same day.

Enter your name.
Enter a 10-digit phone number.
Enter a 5-digit ZIP code.

We use your details only to call you about this estimate. Privacy policy

Free estimate

Three quick steps

What do you need?
Where is the roof?

We cover every Staten Island ZIP.

Where do we call you back?
Enter your name.
Enter a 10-digit phone number.

Free, no obligation. We call you back, usually the same day. Privacy

Rather talk? (347) 323-9128